Ukuphoswa kwesanti eluhlazaInkqubo ibonelela ngoyena ubhetyebhetye kunye nesona sixhobo sineendleko. Eyethuisanti yokuphosa isisekoIxhotywe ilebhu epheleleyo yentsimbi ukumisela imeko yeekhemikhali kunye neyomatshini yokunyibilika nganye kunye nokuhlalutya imeko yesinyithi esinyibilikisiweyo ngaphambi kokugalela. IiMicrosections ziyavavanywa phantsi kwemicroscope ukufumana ulwazi lokugqibela malunga nokuphosa okusonjululwe. Sikhupha isatifikethi se-3.1 kwinxalenye nganye ehanjisiweyo kwisicelo somthengi.
Izibonelelo zethu kwiNkqubo yokuphosa iSand:
Ishumi leminyaka lamava ekubunjweni ngentlabathi eluhlaza, ekubunjweni iqokobhe kunye nobuchwepheshe machining.
• Iibhola ezichanekileyo ezilinganayo ngokobume obunzima bangaphakathi.
• Ukubonisana okunabileyo okuqala kwinqanaba loyilo.
• Ulawulo lomgangatho kuyo yonke inkqubo yokuvelisa kunye nokuthembeka kwenkqubo ephezulu.
Zeziphi izinyithi kunye neeAlloys esiziphosa kwisanti yethu Baza, Foundry
• Ngwevu yeNsimbi: GJL-100, GJL-150, GJL-200, GJL-250, GJL-300, GJL-350
• Intsimbi ye-Ductile: GJS-400-18, GJS-40-15, GJS-450-10, GJS-500-7, GJS-600-3, GJS-700-2, GJS-800-2
• IAluminiyam kunye neeAlloys zazo
• Ezinye izixhobo kunye neMigangatho xa kuceliwe
▶ Amandla oLuhlu lweSanti ekubunjweni ngesandla:
Ubungakanani beMax: 1,500 mm × 1000 mm × 500 mm
Ubunzima bobunzima: 0.5 kg - 500 kg
• Amandla oNyaka: iitoni ezingama-5 000 - iitoni ezingama-6,000
• Ukunyamezelana: Kwisicelo.
▶ Isakhono sokuphosa isanti ngoomatshini bokubumba abazenzekelayo:
Ubungakanani beMax: 1,000 mm × 800 mm × 500 mm
Ubunzima bobunzima: 0.5 kg - 500 kg
• Amandla oNyaka: iitoni ezingama-8,000 - iitoni ezili-10 000
• Ukunyamezelana: Kwisicelo.
Inkqubo ePhambili yokuPhumela
• Iipateni kunye noYilo lwezixhobo → Ukwenza iipateni → Inkqubo yokuBumba → Uhlalutyo loKwenziwa kweMichiza → Ukunyibilika kunye nokugalelwa → Ukucoca, ukugaya kunye nokuqhushumba → Ukuqhubekeka kweposi okanye ukupakisha ngenqanawa
Uvavanyo lweZakhono zokuHlolwa kweSand
• Uhlalutyo lwezinto ezibonakalayo kunye nezenziwa ngesandla
• Uhlalutyo lwe-Metallographic
• Uvavanyo lobulukhuni bukaBrinell, Rockwell kunye neVickers
• Uhlalutyo lwepropati yoomatshini
• Ukuvavanywa kwefuthe lobushushu eliphantsi nelisiqhelo
• Ukuhlolwa kococeko
• Uhlolo lwe-UT, MT kunye ne-RT
|
Igama le-Iron Iron
|
I-Iron Iron kwiBakala | Umgangatho |
| Intsimbi eNtsundu | I-EN-GJL-150 | EN 1561 |
| I-EN-GJL-200 | ||
| I-EN-GJL-250 | ||
| I-EN-GJL-300 | ||
| I-EN-GJL-350 | ||
| Intsimbi yeDuctile | I-EN-GJS-350-22 / LT | EN 1563 |
| I-EN-GJS-400-18 / LT | ||
| EN-GJS-400-15 | ||
| EN-GJS-450-10 | ||
| EN-GJS-500-7 | ||
| EN-GJS-550-5 | ||
| EN-GJS-600-3 | ||
| I-N-GJS-700-2 | ||
| EN-GJS-800-2 | ||
| Intsimbi yeActempered Ductile | I-EN-GJS-800-8 | EN 1564 |
| EN-GJS-1000-5 | ||
| I-EN-GJS-1200-2 | ||
| Intsimbi yeSiMo | EN-GJS-SiMo 40-6 | |
| EN-GJS-SiMo 50-6 |
