I-OEM yesiqhelo yeNodular I-Cast Iron Sand Castings ukusuka I-China Iron Foundry. Iinkonzo machining CNC ziyafumaneka kumzi-mveliso wethu machining.
I-Ductile cast iron, emele iqela lesinyithi, ekwabizwa ngokuba yi-nodular iron. Isinyithi se-Nodular sifumana i-nodular grafite ngokusebenzisa i-spheroidization kunye nonyango lwe-inoculation, ethi iphucule ngokufanelekileyo iipropathi zoomatshini bentsimbi, ngakumbi ukubumbana kunye nokuqina, ukuze ufumane amandla aphezulu kunentsimbi yekhabhoni.
Ukufakwa kweentsimbi ezimnyamaukusebenza okungcono kokukhwankqiswa kunentsimbi yekhabhoni, ngelixa ii-castings zentsimbi zecarbon zinokulunge ngakumbi. Kwaye ukuya kuthi ga kwinqanaba, i-ductile iorn castings inokuba nemidlalo ethile yokuthintela ukunxiba kunye nomhlwa. Ke ukulahla i-ductile yensimbi kunokusetyenziselwa ukugcinwa kwempompo okanye iinkqubo zonikezelo lwamanzi. Nangona kunjalo, kusafuneka sithathe amanyathelo okukhusela ekubambeni nasekurheni.
Isinyithi se-Ductile ayisiyonto inye kodwa yinxalenye yeqela lezinto ezinokuveliswa zibe noluhlu olubanzi lweepropathi ngokulawulwa kwesakhelo esincinci. Uphawu oluqhelekileyo oluchazwa leli qela lezixhobo yimilo yegrafayithi. Kwiintsimbi ze-ductile, i-graphite ikwimo yamaqhuqhuqhu kunokuba iflakes njengoko ikwintsimbi engwevu. Ubume obubukhali beeflashi zegraphite zenza iindawo zoxinzelelo ngaphakathi kwesinyithi kunye nobume obujikeleziweyo bamaqhuqhuva kangako, oko kuthintela ukwenziwa kweentanda kunye nokubonelela ngokuqiniswa kokuqina okunika igama ingxubevange.
Ukuthetha ngokubanzi, ukuba i-ductile iron inokuhlangabezana neemfuno zakho, i-ductile iron inokuba lukhetho lwakho lokuqala, endaweni yentsimbi yekhabhoni yokuphosa kwakho.
▶ Izinto zokwenza imveliso ziyafumaneka apha Nodular Iron Foundry Ye-RMC
• Ngwevu yeNsimbi: GJL-100, GJL-150, GJL-200, GJL-250, GJL-300, GJL-350
• Intsimbi ye-Ductile: GJS-400-18, GJS-40-15, GJS-450-10, GJS-500-7, GJS-600-3, GJS-700-2, GJS-800-2
• IAluminiyam kunye neeAlloys zazo
• Ezinye izixhobo kunye neMigangatho xa kuceliwe
▶ Amandla oLuhlu lweSanti ekubunjweni ngesandla:
Ubungakanani beMax: 1,500 mm × 1000 mm × 500 mm
Ubunzima bobunzima: 0.5 kg - 500 kg
• Amandla oNyaka: iitoni ezingama-5 000 - iitoni ezingama-6,000
• Ukunyamezelana: Kwisicelo.
▶ Isakhono sokuphosa isanti ngoomatshini bokubumba abazenzekelayo:
Ubungakanani beMax: 1,000 mm × 800 mm × 500 mm
Ubunzima bobunzima: 0.5 kg - 500 kg
• Amandla oNyaka: iitoni ezingama-8,000 - iitoni ezili-10 000
• Ukunyamezelana: Kwisicelo.
Inkqubo ePhambili yokuPhumela
• Iipateni kunye noYilo lwezixhobo → Ukwenza iipateni → Inkqubo yokuBumba → Uhlalutyo loKwenziwa kweMichiza → Ukunyibilika kunye nokugalelwa → Ukucoca, ukugaya kunye nokuqhushumba → Ukuqhubekeka kweposi okanye ukupakisha ngenqanawa
Uvavanyo lweZakhono zokuHlolwa kweSand
• Uhlalutyo lwezinto ezibonakalayo kunye nezenziwa ngesandla
• Uhlalutyo lwe-Metallographic
• Uvavanyo lobulukhuni bukaBrinell, Rockwell kunye neVickers
• Uhlalutyo lwepropati yoomatshini
• Ukuvavanywa kwefuthe lobushushu eliphantsi nelisiqhelo
• Ukuhlolwa kococeko
• Uhlolo lwe-UT, MT kunye ne-RT
| Igama le-Iron Iron
|
I-Iron Iron kwiBakala | Umgangatho |
| Intsimbi eNtsundu | I-EN-GJL-150 | EN 1561 |
| I-EN-GJL-200 | ||
| I-EN-GJL-250 | ||
| I-EN-GJL-300 | ||
| I-EN-GJL-350 | ||
| Intsimbi yeDuctile | I-EN-GJS-350-22 / LT | EN 1563 |
| I-EN-GJS-400-18 / LT | ||
| EN-GJS-400-15 | ||
| EN-GJS-450-10 | ||
| EN-GJS-500-7 | ||
| EN-GJS-550-5 | ||
| EN-GJS-600-3 | ||
| I-N-GJS-700-2 | ||
| EN-GJS-800-2 | ||
| Intsimbi yeActempered Ductile | I-EN-GJS-800-8 | EN 1564 |
| EN-GJS-1000-5 | ||
| I-EN-GJS-1200-2 | ||
| Intsimbi yeSiMo | EN-GJS-SiMo 40-6 | |
| EN-GJS-SiMo 50-6 |
